www.alangrovecomponents.com

 

Ditto!! A-G!!

pdq67

Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

I just went to the alangrove page for BBCs and...wow. They have got to be the craziest looking brackets I have ever seen. Any higher and you'll have to cut a hole in your hood for the Alternator!

What's wroong with stock brackets? They can be had at OPG or the like, for a decent price.

 

1969 chevelle ,i have power sterring and a CSI electric water pump,what bracket works good for this setup,

This is the one I use http://www.alangrovecomponents.com/B.B.Electric_Pump.htm
Heres a pic

and what amp alternator should i use, running a electric fuel pump,waterpump,fans.is 100 amp fine ,i drag race but street use to.but i really need to find a good bracket ,any help.thanks .steve

Use at least a 100 amp alternator wired as a 3 wire. Be more concerned with what the alternator puts out at idle than the max rating. You need good output at idle with all that stuff running. I use a Powermaster 12SI 140 amp. A CS-130 would also be a good choice.

 

Stock setup is fine. I use the "long arm" earlier style bracket. Oversized pulley on the alt and it runs to 7200 rpms no problem. Never spit a belt. Bling is OK too, but not required for good service at R's.