Anyway to easily find a hydraulic lifter clacking? Hearing some clacking at idle on the engine right side. Valves are freshly adjusted, 1/2 a turn. I removed the valve cover after the engine had warmed up, pushed on every lifter to make sure none were uncharged. I rotated the engine a bit to make sure I got all off them. Everything was nice and tight.
Started the engine with valve cover off and listen with a screwdriver to the ear on every rocker nut. Nothing seemed really off. Heads and intake were off recently, I visually inspected every lifters and the cam, everything was good. Heads are freshly rebuilt, no funny business going on with them.
There is a really faint clacking sound under load. It's so faint that I'm on the verge of thinking I'm imagining it. Just trying to shed some light on this. Might be hard to hear on video but here it is anyway:
Started the engine with valve cover off and listen with a screwdriver to the ear on every rocker nut. Nothing seemed really off. Heads and intake were off recently, I visually inspected every lifters and the cam, everything was good. Heads are freshly rebuilt, no funny business going on with them.
There is a really faint clacking sound under load. It's so faint that I'm on the verge of thinking I'm imagining it. Just trying to shed some light on this. Might be hard to hear on video but here it is anyway:
