I have Dart 310Cc alum heads on a gen 5 block. Having a real heck of a time bolting this up in my 71 chevelle. I tried a few different moroso motor mounts ,not sure what they were exactly. The car had a 350 in it using stock frame mounts.
I tried using 2 1/8 supercomps and they wernt close to fitting,then bought 2in supercomps and the motor still wont fit with them. It's like the motor is too far foward ,im having more of a hard time with the driver side...
I even drilled new holes on the frame mounts and moved them an inch back and im still way off. Anyone ever run into this problem? thanks!!!
I tried using 2 1/8 supercomps and they wernt close to fitting,then bought 2in supercomps and the motor still wont fit with them. It's like the motor is too far foward ,im having more of a hard time with the driver side...
I even drilled new holes on the frame mounts and moved them an inch back and im still way off. Anyone ever run into this problem? thanks!!!
