[Paul Lower SoCal]

The assembly manuals are not clear in detail. I need a picture for a 68-72 350 Turbo Hydramatic floor mounted console. You will probably have to jack the car up on the drivers side. The exhaust pipe obstructs the view when all four wheels are on the ground. I need to see the linkage bracket and the shifter arm.

I know this will require a bit of work, so I thank you in advance.

 

[MalibuJerry350]

The shifter uses a cable for operation...no linkage. There is a bracket mounted under a couple of the trans pan bolts to hold the cable. The actuator arm on the trans, which the cable controls, is available from most of the repo houses.

------------------
MalibuJerry350
TC Member #1279
Original owner '70 Chevelle.
593,000 miles on car.
Hey, if it's got wheels, DRIVE IT!
My Chevelle: http://hometown.aol.com/erie614/myhomepage/index.html

 

[Paul Lower SoCal]

Thanks Jerry. I know how it hooks up. I want to see what the original stock bracket and arm look like.