[crazycarguy22]

I have noticed that there are a lot of threads regarding aftermarket dash panels and custom dash builds but noticed there aren't many pictures. I know I would like to see some setups and get some input and tips with ideas and installation.

So this is my call to all Chevelle owners please post up pictures of your dash setups so we can all admire and be inspired. Please if possible maybe include a small write up or review of a product purchased or tips/warnings for custom setups.

I'd start off the pics but at the moment my dash is just stock.
Here is one from the Roadster Shop that I like.

 

[jonathanch]

I'll go first. This is the Dakota Digital dash in my 66. I can't say enough good things about this product. It has all the engine info you could ever need plus additional readouts at the push of a button. Easy to install. Zero problems after 3 years. Great product.

 

[oltmanjr]

Fabbed it myself with autometer gauges

 

[2006derald]

Looks good, I might do that to mine. Was It hard to do??? 2006 Derald

 

[oltmanjr]

Looks good, I might do that to mine. Was It hard to do??? 2006 Derald

Wasn't too bad . There is not a lot of room behind it but everything does fit

 

[bikeron]

Here is what Brian's car looks like..(I helped)

 

[crazycarguy22]

I really like the Dakota Digital gauges on the 66, it looks like it was meant to be there. I'm not sure if I like them as much for the 69-72 models.

Bikeron what is the red button thing below the red light on the dash?

All the setups look really good, lets see if we can get some more!

 

[bikeron]

I really like the Dakota Digital gauges on the 66, it looks like it was meant to be there. I'm not sure if I like them as much for the 69-72 models.

Bikeron what is the red button thing below the red light on the dash?

All the setups look really good, lets see if we can get some more!

It's the shift light..it just has a plastic cap on it so you don't see it all the time..

Ron

 

[66SSFan]

There are some good pics in this thread too.
http://www.chevelles.com/forums/showthread.php?t=147089&highlight=dash

 

[DaleM]

I used Dakota Digital's street rod 'universal' setup on my old 67.

http://dalesplace.com/others/67chevelle/interior.htm

 

[crazycarguy22]

There are some good pics in this thread too.
http://www.chevelles.com/forums/showthread.php?t=147089&highlight=dash

Thanks for the thread, I thought I saw one somewhere but couldn't find it when I searched before making this one.

 

[crazycarguy22]

Anyone else have any setups to share?

 

[chuckd71]

Not in yet but you get the idea more or less.
http://www.flickr.com/photos/21527394@N06/6706501631/

 

[Geek's 65]

Not in the car yet but this is what is going into my 70 El Camino

 

[wilkyinnh]

WOW! After seeing that Dakota setup on the 66 I'm rethinking the issue of putting the original back in. My next question will be the wiring harness. I've purchased a new complete set from American Wiring to rewire the car, does anyone know if their would be an issue between stock wiring and the Dakota digiatl? Thanks for the pics. I'll put mine up when I get down the road abit.

 

[jonathanch]

Should not be a problem. I have read that all the aftermarket harnesses are 100% compatible with the Dakota Digital dash. This was one of the easiest mods I have ever done. Best directions of any manufacture.

 

[crazycarguy22]

Not in yet but you get the idea more or less.

That looks really nice, what gauges are you using?

 

[crazycarguy22]

Not in the car yet but this is what is going into my 70 El Camino

The wood panels are awesome, its a really nice custom touch. Is that a Covan's panel?

 

[Geek's 65]

It is a Covan panel. The lower right panel will also house a clock, the radio and the light switch so it won't be quite so bare.

G

 

[Texas69]

That looks really nice, what gauges are you using?

I think those are from Speedhut