[nb707]

ps valve job =COMPETITION RADIUSED VALVE JOB AND GUIDES HONED

SS CC
CNC MACHINE PORT AND POLISH COMBUSTION CHAMBERS

how much more power than the stock (out of box ) did i get. i know i got more flow. 10 hp 20 torque? am guessing thanks

 

[Wolfplace]

ps valve job =COMPETITION RADIUSED VALVE JOB AND GUIDES HONED

SS CC
CNC MACHINE PORT AND POLISH COMBUSTION CHAMBERS

how much more power than the stock (out of box ) did i get. i know i got more flow. 10 hp 20 torque? am guessing thanks

=
That is just the standard Brodix valve job
I have not back to back tested the CNC chamber on the BB but on a very mild 350 hyd flat tappet with a 200ccRR head which was to big it was worth 30+HP
The short block never left the dyno so it is a pretty valid test

I have sold a lot of these heads & always recommend the chamber option, don't know why you would not get it unless it is a smaller chamber combo where they cannot do it.

 

[nb707]

=
That is just the standard Brodix valve job
I have not back to back tested the CNC chamber on the BB but on a very mild 350 hyd flat tappet with a 200ccRR head which was to big it was worth 30+HP
The short block never left the dyno so it is a pretty valid test

I have sold a lot of these heads & always recommend the chamber option, don't know why you would not get it unless it is a smaller chamber combo where they cannot do it.

the motor is a 468 232 /242 575/595 rollor cam the car made at the rear wheels 400 hp 495 torqe with out cnc now the heads are cnc. mike so your guess would be 50 plus hp. on this combo

 

[Wolfplace]

the motor is a 468 232 /242 575/595 rollor cam the car made at the rear wheels 400 hp 495 torqe with out cnc now the heads are cnc. mike so your guess would be 50 plus hp. on this combo

=
That is not exactly what I said
No I would not expect 50+ with just the CNC chamber but it is possible
Is that a hyd roller? Seems kinda small

 

[nb707]

=
That is just the standard Brodix valve job
I have not back to back tested the CNC chamber on the BB but on a very mild 350 hyd flat tappet with a 200ccRR head which was to big it was worth 30+HP
The short block never left the dyno so it is a pretty valid test

I have sold a lot of these heads & always recommend the chamber option, don't know why you would not get it unless it is a smaller chamber combo where they cannot do it.

=
That is not exactly what I said
No I would not expect 50+ with just the CNC chamber but it is possible
Is that a hyd roller? Seems kinda small

this is the cam http://www.lunatipower.com/Product.aspx?id=2103&gid=264

 

[Wolfplace]

this is the cam http://www.lunatipower.com/Product.aspx?id=2103&gid=264

=
A hyd roller makes better sense
Is there a reason why you quoted both of my answers???

 

[nb707]

no. but thanks you. your a well repected engine builder its great to have you here