ttt

 

why would you????

 

Because he wants a deep look to the front...


Not sure IF 15X10 will work up front. I used to run 15X7 with 265/50-15 tires (pretty wide), and then switched to 17X9.5 with 275/40-17s up front... These had 6 " of BS (might have worked with 5.75" BS, but I wanted to stay away from the outer lip). Mine was a '66, but I have heard the fronts will handle about the same tires and BS between those years.

On a 15X10, with that much BS, not sure the wheel would clear the ball-joints, etc... You could run less BS (deeper look), but then its going to start sticking out of the wheel well...

 

Its gonna be way out of wheel well and also putting major stress issues on your wheel bearings.

 

15" and low profile will be really short. If you want low profile rubber you're probably going to have to go at least 16". 15s with lo-pro tires look odd on a chevelle and only work for civics and what not. I am hoping to go 18x10 in the back and 17x7 in front with a nice fat lip and some low profile BFG drag radials. It should look pretty sick...

 

On a 15X10, with that much BS, not sure the wheel would clear the ball-joints, etc... You could run less BS (deeper look), but then its going to start sticking out of the wheel well...

I agree with Tony. Just don't think it will clear.
However,a 17x9.5 w/5.5" backspace will work fine.