[waldo1]

Just built a new rod s10 pro street and wanted a over drive well anyway it pulls hard but i have to let up on the gas to make it shift to the next gear at high rpm i ordered a governor kit for it and will experiment with it this weekend man it pulls so hard if it would shift i think it would be a low 11 sec rod from the feeling it gives it has 31 " tires in the rear with 411 gears it cruises at 55 mph at 1500 rpm on the hwy so what yall think about my problem and i have done the factory reset a few times with no luck

 

[furball8994]

Is you TV cable set correctly?
Heres a link that may help.
http://www.700r4.com/faq/whattv.shtml

 

[smokn72ss]

do you mean in overdrive? if thats what you mean there is a vavle for 3/4 throttle shifting to make it stay in od ......
if you mena lower ears sounds liekyour tv cable isn't adjusted right ... most trans places will help ya for free if you can't do it withthe above post link ...... good luck I've had my 700r4 behig my sbc for 9 years of abuse still going strong

 

[waldo1]

ok if i shift it manually would the governor still control the shfit rpm that it shifts at