I have a new in the bag kit at my car in the storage garage that I'm not using, I'll go by there this afternoon and measure it along with pics, want the cable measurement? my trans doesn't use a TV cable since it's a manual valve body but I didn't realize that till later
Are you creating a new bracket for use with a 2004r or 700r4? If so, what you really need to know is the geometry from the centerline of the throttle shaft of the pin.
Yes measure please, I'm using it for a 700R4
I'm using it for a 700R4
Sure, want the whole kit? it's a TCI kit from Summit, I also have a Shiftworks 4 spd Forward pattern P R N D 3 2 1 lense Edit again, I also have a SW detent plate but don't think you'd like it, this is the cable kit I have but not using, make an offer but you’ll have to pay shipping from Fl 33713 I’ll throw in the shift lense and SW forward shift detent plate but it Slap 1-2 then squeeze handle for 3 then Slap 4, seems odd to me
No was just looking to the plate for the carb itself.
I'll go there and measure the plate and take pics
Do you need thickness? I think the battery is dead in my digital caliper
Quice measurement with a ruler is ok. More than likely it's going to be like 1/8 maybe 3/16.I'll go there and measure the plate and take pics
Just curious - why are you building your own?
I just can see spending like $35 plus shipping for a little piece of metal.
Gotcha. Here is one for $26.58 with free shipping if this helps:
I'm well aware of damaging the trans.
www.stevesnovasite.com
Really good info.I made my TV Geometry Corrector Bracket for my 2004R trans (the reason being that the correct version for the Holley carb was not available when I installed my 2004R - See post #8).
The dimensions for the correct geometry corrector for a Holley carb with a 2004R or 700R4 trans is shown on post #16.
700r4 Holley dp bracket
Who has the demensions and layout for one of these? I'd rather make one then pay these thieves $30 for one.
NOTE: The TV Geometry Corrector Bracket (for a Holley carb with a 2004R or 700R4 trans) shown in post #10 is the older/incorrect style (as explained in the above link).
I just bought that TCI kit from Summit last year, wonder why they'd be selling old (Not Correct) parts?I made my TV Geometry Corrector Bracket for my 2004R trans (the reason being that the correct version for the Holley carb was not available when I installed my 2004R - See post #8).
The dimensions for the correct geometry corrector for a Holley carb with a 2004R or 700R4 trans is shown on post #16.
700r4 Holley dp bracket
Who has the demensions and layout for one of these? I'd rather make one then pay these thieves $30 for one.
NOTE: The TV Geometry Corrector Bracket (for a Holley carb with a 2004R or 700R4 trans) shown in post #10 is the older/incorrect style (as explained in the above link).
