[koosh22]

Pls see attached pics ofvthe headers I plan to run (small block) when car gets back from paint. It's a 67 coupe.
Can anyone tell where to get the pipes which would connect to these headers? In fact, I would need all the way back to the tips!
Unfortunately, I have no clue what brand they are, and there are no markings on them?
Thanks

 

[2/75NastyNewbs]

There’s no picture. Pypes makes a full kit that you can bolt together.

 

[koosh22]

Ooops....my bad....

 

[Flounder68]

I used Pypes full kit

 

[koosh22]

I used Pypes full kit

They have pipes that will connect to these headers? Part number?

 

[71350SS]

Those ignition wires will cook if you let them touch those headers
call me mr obvious

 

[71350SS]

This is what you need but with a 45 degree not a 90*.

Flowtech 10010FLT Flowtech Block Hugger Toob

Hugger Toobs part number 10010FLT offers a universal installation solution for all small block Chevy V-8 applications. Includes left and right side pipes. (Headers sold separately)

www.holley.com

That 90* is too sharp a bend you need a 45*
IMO with all the trouble the shorty's are going to cause I wonder if some long tube headers wouldn't be a better choice.

Hooker BlackHeart 70701327-RHKR Hooker BlackHeart Adapter Kit

At the heart of any performance vehicle is the exhaust system. Hooker with its classic heart logo has been at the core of the exhaust industry for decades. Many of the most powerful vehicles on the planet have used Hooker Headers. Hooker continues to push the boundaries of performance with the...

www.holley.com

Something like this would be what you're looking for. They would just hook up to your headers reducers.

 

[Flounder68]

@koosh22 you could use the collector adapter and then take to a muffler shop and have them make the pipe to connect to the rest of the system. Or call Pypes and see if they have a downpipe for shorty headers to use with their kits. They show some downpipes on their site you can buy separately.

 

[RICH1965]

Those look really similar to my dougs shorty headers. Those came with collector adaptors that were strait and about 6"-8" long.

 

[Bob Tiley]

Pypes or Flowmaster exhaust system and a local muffler shop will have to bend and cut some short peices to connect them up.

 

[CMCE]

To my knowledge, nobody makes adaptor downpipes for shorty headers. Header lengths are not standardized accross the industry so every header is a bit different. Pypes/MagnaFlow/Flowmaster all make what they call 'crossmember back' kits that will either meet up your full length headers or use an engine specific downtube if you're using manifolds. Like I said before, Shorties are in that no-man's land so a custom pipe will need to be fabricated. You will need to decide between X-Pipe, H-Pipe, or True Dual exhaust. Pypes makes all 3 types and you can choose any of their mufflers or no mufflers if you want to use something different, Flowmaster systems are strictly H-Pipe, and MagnaFlow is X-Pipe. There are sound clips here to help you decide.

 

[koosh22]

This is what you need but with a 45 degree not a 90*.

Flowtech 10010FLT Flowtech Block Hugger Toob

Hugger Toobs part number 10010FLT offers a universal installation solution for all small block Chevy V-8 applications. Includes left and right side pipes. (Headers sold separately)

www.holley.com

That 90* is too sharp a bend you need a 45*
IMO with all the trouble the shorty's are going to cause I wonder if some long tube headers wouldn't be a better choice.

Hooker BlackHeart 70701327-RHKR Hooker BlackHeart Adapter Kit

At the heart of any performance vehicle is the exhaust system. Hooker with its classic heart logo has been at the core of the exhaust industry for decades. Many of the most powerful vehicles on the planet have used Hooker Headers. Hooker continues to push the boundaries of performance with the...

www.holley.com

Something like this would be what you're looking for. They would just hook up to your headers reducers.

Why am I gto have all sorts of trouble with these headers?

 

[71350SS]

Why am I gto have all sorts of trouble with these headers?

I was thinking if you can't find the parts on-line that it might be a problem for you but if its no problem then more power to you.

Good Luck with the gto

 

[koosh22]

I was thinking if you can't find the parts on-line that it might be a problem for you but if its no problem then more power to you.

Good Luck with the gto

How did fat fingered "going" become "gto"???? LMAO!

 

[mrpaticular]

A good muffler shop can make what you want.
What state are you in ?
Rick

 

[koosh22]

A good muffler shop can make what you want.
What state are you in ?
Rick

CT/MA border