Team Chevelle banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
2,221 Posts
The courtesy light harness has an orange wire that connects to the BAT terminal on the fuse block (power). It has white wires at each side that connect to the door jamb switches (ground. You remove the white wire that is already connected to the door jamb switche, connect the courtesy light harness wire, it will have a pig tail to reattach the original wire to. This is the same on both sides. The passenger side gets the bullet connector, the driver side gets the tab connector.

If you already have a wire connected to the BAT terminal on the fuse block, the courtesy light power wire should have a pigtail, as shown in this pic, that will accommodate an existing wire or be available for future use.
 
1 - 1 of 1 Posts
Top