Team Chevelle banner

Wheel Hop

1001 Views 6 Replies 6 Participants Last post by  Bomber '67
Am going back together with my car that has been apart for years. When I was driving it , I remember the thing I HATED WORST was when I wanted to "burn out" from a dead stop the rear end would bounce very badly, What can I do to eliminate this and retain as much origonality as possible. Obvious modifications such as ladder bars are not an option. THANKS!!!
1 - 1 of 7 Posts
I'm using and like Edelbrocks "No-Hop" bars and what I like about them is you can't see them unless the car in up on the rack, from ground level they are not visable.

They do the same thing as the SSM lowers, they give the rear suspension some leverage to keep the housing from trying to twist itself out from under the car when applying heavy sudden launch loads with the loud pedal.

1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.