Team Chevelle banner

what happens if i.....

728 Views 8 Replies 4 Participants Last post by  iwantachevelle
i have a block with ventalation through the valve covers, one where the oil is poured in and one where there is a vacume line hooked up to a 1 inch spacer under my carb. what happens if i disconnect the vacume line and take out the spacer?
Not open for further replies.
1 - 1 of 9 Posts
<BLOCKQUOTE>quote:</font><HR>Originally posted by justinhertel:
well im installing a nitrous plate and no studs are long enough to go through the 1 inch plate the half inch plate and the half inch base on the carb. glad to know it wont do anything thought thanks.<HR></BLOCKQUOTE>

Sounds like a stud about 3" long would do just fine. That would give you 1/2" engagement in the manifold and 1/2" left over at the top for a washer and nut.

67 Nova 3475# daily driver
10:1 406, 700R4, 224° Comp cam, RPM and a Q-jet - 11.76 @ 116
64 Chevelle Road Racer in the works
67 Nova Wagon under construction
65 Corvette Road Racer
See less See more
1 - 1 of 9 Posts
Not open for further replies.