Team Chevelle banner
1 - 4 of 4 Posts

·
Registered
Joined
·
313 Posts
Discussion Starter · #1 ·
I am looking for some feedback not only on the cam but the HR Retro fit lifters.
Good, bad ugly or pretty
Considering a quick change from a 60204 HFT cam and lifters.
Can I run the same push rods between these 2 cam and lifter combos?
Thoughts or guidance appreciated
 

·
Premium Member
Joined
·
760 Posts
I am looking for some feedback not only on the cam but the HR Retro fit lifters.
Good, bad ugly or pretty
Considering a quick change from a 60204 HFT cam and lifters.
Can I run the same push rods between these 2 cam and lifter combos?
Thoughts or guidance appreciated

Bill , I just changed my whole combo from the 60204 voodoo also. I am going retro HR Vodoo , I am also going to use the new lunati street retro lifters about $300.00, Im pretty sure you have to get new pushrods
 

·
Premium Member
Joined
·
6,172 Posts
Lifters are not the same size, so different pushrods are a must.
 

·
Registered
Joined
·
14,244 Posts
Running a Voodoo here and yes, your gonna need to pushrods that's the least expense outta the whole deal though.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top