Using a non-air harness in an air car

1194 Views 2 Replies 2 Participants Last post by Harvey, Jan 28, 2001

Harvey

Discussion Starter · Jan 28, 2001

I have a 67 Chevelle with air. I am using a non air dash harness. The difference is that on the non air harness the heater switch wires/plug to the blower motor switch are part of the main harness. In the air harness the ac/heater system has its own harness that plugs into the main harness with just one wire. Is there a wire on the non air harness that I can connect the ac/heater harness to and just leave the blower motor plug on the non air harness unconnected??
Thanks for any help
Harvey

Save

1 - 2 of 3 Posts

Harvey

Discussion Starter · #3 · Jan 28, 2001

Thanks Ken. I was hoping that would do it! BTW, very nice Chevelle. I haven't seen that many white ones...I might have to think about that for mine.
Harvey

Save

1 - 2 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month