Team Chevelle banner
  • Hey everyone! Enter your ride HERE to be a part May's Ride of the Month Challenge!

1 - 3 of 3 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 ·
I have a 67 Chevelle with air. I am using a non air dash harness. The difference is that on the non air harness the heater switch wires/plug to the blower motor switch are part of the main harness. In the air harness the ac/heater system has its own harness that plugs into the main harness with just one wire. Is there a wire on the non air harness that I can connect the ac/heater harness to and just leave the blower motor plug on the non air harness unconnected??
Thanks for any help
Harvey
 

·
Registered
Joined
·
242 Posts
Harvey, you should be able to remove the brown wire from the non A/C heater switch plug, and the plug it into the short brown jumper wire on the A/C harness heater switch plug. I believe that is all that needs to be done.

------------------
Ken<UL TYPE=SQUARE><LI>Aces # 125<LI>Team Chevelle # 586[/list]My 67 and other projects
 
1 - 3 of 3 Posts
Top