Chevelles.com banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I need a DOUBLE HUMP cross member for my
1978 El Camino to clear the left pipe of the duals that I want to install. Does anyone know of an after-market source or a GM part that will do the job. HELP!
 

·
Registered
Joined
·
11,941 Posts
You could use the exhaust for 84-88 Monte Carlo SuperSports and you won't need a double hump crossmember. It splits behind the cat converter.

------------------
Leo Paugh
Maryland Chevelle Club #017
Those who do the world's real work don't usually wear ties.



[This message has been edited by chev64 (edited 11-05-99).]
 

·
Registered
Joined
·
36 Posts
The monte ss exhaust is a good idea but you will probably have to legnthen it. The El Camino wheel base is 117.1 and i think the monte is 107?.
 
T

·
Guest
Joined
·
0 Posts
If you are looking for a true dual exhaust crossmember, Gforce Performance makes a modified stock x-member. Their web page is located at sites.netscape.net/gforcejohn3/g2.htm .

If you have any fabrication skills, you can make this modification yourself and save a few $$$. I made my own several years ago before anything was available. I also added a removable lower section that unbolts but adds quite a bit if strength.

On my 79 Malibu, I have had both 3" and 3 1/2" pipes which cleared with no problems.

Good luck
Todd G
Malibu Muscle
www.qis.net/~tgeisler

------------------
Malibu Muscle - http://www.qis.net/~tgeisler
[email protected]

[This message has been edited by Todd Geisler (edited 11-05-99).]
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top