Team Chevelle banner
1 - 7 of 7 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I recently purchased a re-manufactured G.M. Tilt Column for a 1966 Chevelle. It tilts UP only One Notch and DOWN Three Notches and almost touches the seat! Sounds Backwards to me. I sent it back to the builder and he stated thats the way it's supposed to be. I would value a Chevy enthusiasts opinion. Does that operation sound correct? Thanks, Chris
 

· Premium Member
Joined
·
6,984 Posts
Sounds about right the early tilts did not have the range the new opnes do .......I had my 66 tilt rebuilt with modern internals I now have alot more range in the tilt .............who did your rebuild
 

· Premium Member
Joined
·
1,398 Posts
My 70 tilt column can go way down also, compared to how little it goes up.

But it goes up just enough, so that's what matters.

Sounds like yours was correct.
.
 

· Premium Member
Joined
·
1,398 Posts
Here's a shot of mine, all the way up.


.
 

· Premium Member
Joined
·
4,503 Posts
Both my '68 Caprice and '68 Chevelle do not go up as far as they go down. Two '71s that I have had were the same way.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top