[cgocifer]

Anyone using their new FI tank and fuel pump systems? Their pumps require return lines but I'm using an LS2 intake and fuel rails which only has a supply line. Supposed to use a 5th gen camaro pump and module which doesn't use a return. Not sure if that pump will work with these tanks... any thoughts or work arounds? They're about a grand less than a ricks vaporworks tank.

 

[65_LS1_T56]

Dan I'm sure it would work with your motor, just use the Covette FPR. It has a feed from the tank, a return back to the tank and a pressure line to the engine. Lots of guys use these with success. You can but them like this with AN adapters installed or GM push on connectors (stock).

 

[cgocifer]

Thanks Aaron! What is the pressure out of the regulator? Where does it mount? On the frame horizontally?

Dan

 

[65_LS1_T56]

Thanks Aaron! What is the pressure out of the regulator? Where does it mount? On the frame horizontally?

Dan

I believe ~58psi, yep on the frame is fine towards the back of the car near the tank.

 

[cgocifer]

Perfect, thanks again! I'll give them a call. Will save me a ton of cash. Love the Rick's tanks, but that's a lot of jack for a tank. Could use the $$ elsewhere.

Where's a good place to order the FPR with the AN fittings?

 

[Bad66Chevelle454]

I used that same Corvette filter/regulator on the Project Teachers Pet 65 Chevelle. Worked great!!! I mounted it horizontally right outside of the tank, kind of by the pumpkin on the rearend. We used a Rick's tank in that set up though, not a Tanks.

 

[GsxrDave]

Im using that same setup on my car now been on there for 1.5yrs with no issues so far.

 

[65_LS1_T56]

Perfect, thanks again! I'll give them a call. Will save me a ton of cash. Love the Rick's tanks, but that's a lot of jack for a tank. Could use the $$ elsewhere.

Where's a good place to order the FPR with the AN fittings?

He's a thread with places/prices and links. Didn't go thru the whole thing, but I believe Russell makes the fittings. Ebay and maybe Amazon you can get it with the fittings as a set.

http://ls1tech.com/forums/conversio...e-fuel-filter-regulator-37-93-38-34-ebay.html

 

[cgocifer]

Thanks again for the tips and info! The link to LS1Tech helped a ton. I found my solution and it just saved me about a grand! Going with the Tanks Inc setup and the 'Vette filter/regulator.

You guys rock!