Team Chevelle banner
1 - 3 of 3 Posts

·
Registered
Joined
·
155 Posts
Discussion Starter · #1 ·
Just received my new moser 9 in for a 70 malibu a-body and was going to replace the lower control arms with lakewoods lift bars (ssm bars)To deal with the wheel hop issue, well they dont work. The brackets are totally different on the 9 in., same location but different set-up. Dont have any clues what to do now, re-use my old ones, send them back and get aftermarket arms,poly or rubber, any help would be great, new at this stuff and I'm lost. Thanks for the help, Money is an issue, mainly for street with 454 with 500 h.p with occasional drag use
 

·
Registered
Joined
·
155 Posts
Discussion Starter · #4 ·
So for now for money reasons would I be ok with just adj. uppers and my stock lowers with rubber bushings.
 
1 - 3 of 3 Posts
Top