Team Chevelle banner
  • Hey everyone! Enter your ride HERE to be a part JUNE's Ride of the Month Challenge!

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
I need an intermediate steering shaft coupling seal for my 69 Conv. and I can't seem to be able to find one.


TIA Kirk



[This message has been edited by Captain Kirk (edited 02-10-2000).]
 

·
Administrator
Joined
·
16,204 Posts
Are you referring to the upper slip joint by the firewall? Have you tried the GM dealer?
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #3 ·
64elcamino,

No, I am talking about the intermediate coupling joint on the lower shaft. It is between the lower coupling and the firewall. It is a rubber seal and it was ripped when I got the car and I really need a new one.

Kirk
 

·
Administrator
Joined
·
16,204 Posts
Is yours round or oval? I have a round one about 2 1/2". It is used but good.
 

·
Registered
Joined
·
3,212 Posts
Kirk,
I just finished doing my steering shaft and also had to replace the seal. It is still available from GM part #7802919. Be very careful and you can work it onto the shaft w. no problem. Alittle silicone spray in the right places may help too. Good luck.
Duke

------------------
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top