Chevelles.com banner

1 - 6 of 6 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
does anyone know of a company making an after market steering column ?. i have changed my chevelle over from a bench seat car ,column shift to a bucket seat car with a factory automatic in the floor and would like to get a floor shift column.
thanks
doug in alabama
 

·
Registered
Joined
·
90 Posts
ididit incorporated,(517)424-0577
National Parts Depot, 1-800-874-7595
Summit Racing, 1-800-230-3030

just a few suggestions.

If you want the "factory" floor mounted automatic console I have one in my 66. I think it's from a 68 or later. I know it's not from a 66.

You'll have to wait till I get my new shifter though. Don't know how long you can wait. I'll be somewhere on this site though, you can bet on that much.

------------------
66 Malibu w/a 454
Edelbrock torker II
Holley 750 double pumper
1 3/4" headers
3"x14" air cleaner
Crane Cam
MSD coil and HEI control
GMPP double roller timing chain
th400 tranny
stall converter on it's way
8mm Moroso wires
 

·
Registered
Joined
·
740 Posts
Flaming River makes columns for our vehicles with a dash ignition. They are tilt columns and summit racing sells them. They look really nice but are quite pricey.
 

·
Premium Member
Joined
·
1,041 Posts
We used an '82 Camaro Tilt Column.


------------------
Team Members Forever #341

Richard, Judy, MAXX2

'69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi., Full Aluminum Bed With Full Tubs, Aluminum Firewall, Custom Aluminum Dash/Gauge Bezel.
 

·
Premium Member
Joined
·
1,041 Posts
<BLOCKQUOTE>quote:</font><HR>Originally posted by BOWTIE 89:
does anyone know of a company making an after market steering column ?. i have changed my chevelle over from a bench seat car ,column shift to a bucket seat car with a factory automatic in the floor and would like to get a floor shift column.
thanks
doug in alabama
<HR></BLOCKQUOTE>

DOUG;

YOU HAVE MAIL!




------------------
Team Members Forever #341

Richard, Judy, MAXX2

'69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi., Full Aluminum Bed With Full Tubs, Aluminum Firewall, Custom Aluminum Dash/Gauge Bezel.
 
1 - 6 of 6 Posts
Top