Team Chevelle banner

Steering column adjustment

827 Views 4 Replies 3 Participants Last post by  DanD
I recently installed a different steering wheel on my 66 and there is a gap now between the end of the column and the dish that the steering wheel bolts to. I tried to loosen the peice that bolts to the dash that supports the column and it wount budge.I know I'm missing something.Could someone please help. Thanx
1 - 1 of 5 Posts
If you can push down on it and close up the gap, you can probably loosen the clamp on the steering shaft under the hood at the lower bearing to move the clamp up while you have some push down on it.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.