Team Chevelle banner

Steering box and headers

1358 Views 25 Replies 9 Participants Last post by  Road Roamer
Just wondering what steering boxes any of you have had luck with. I've got headers and BBC. When looking at reviews for some of the 14:1 and 12:1 boxes, several people have mentioned that the boxes are tight against headers and some have had to dent them to fit. I've been looking at Classic Performance and Borgeson on Summit website and that's where the reviews have come from. I had to remove my current box to get the headers out. I am pulling the motor and having it rebuilt. The last box was an aftermarket that has always had a slow, weeping leak that I never could identify so I thought now would be a great time to change since all other leaks will be taken care of (also putting in a new tremec tkx). Thanks for any advice!

1 - 1 of 26 Posts
Leee 800 series box, Patriot mid-length headers, factory shaft slightly modified for U-joints on both ends. A hair close at #7 tube but clears freely. The headers are now coated by JetHot - I HIGHLY recommend the ceramic coating.

Land vehicle Automotive fuel system Vehicle Motor vehicle Hood

Vehicle Hood Motor vehicle Automotive tire Automotive design
See less See more
  • Like
Reactions: 1
1 - 1 of 26 Posts