Team Chevelle banner

Shorty plugs and wires recommendations for 70 Chevelle 396

1438 Views 6 Replies 7 Participants Last post by  mrpaticular
Hey guys, my spark plug wire is arching badly at my number #8 cylinder against my header due to clearance issues.It appears I need to use shorty plugs and replace the wires used for my MSD HEI ignition system. I also have clearance issues by the #7 cylinder. The old Accel 8mm Hi Temp Spiral Core wires were fine until now but need to be replaced. Any recommendations to replace my AC Delco R45TS with shorty plugs and as to good wires? . It also seems I will need to unbolt the headers so I will probably need good header gaskets as well. I have been told I probably have the wrong headers but want to work with what I have at the moment as the current ones are coated and look nice.
1 - 1 of 7 Posts
They do make a porcelain right angle boot and wire that you can buy individually...They can rest on a red hot header no issues...
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.