Team Chevelle banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter #1
I have a 71 chevelle malibu with a bench seat and column shifter and am going to convert it to buckets and a console. I am assuming that the old seatbelts used for the middle passenger on the bench seat should be removed. Are there any other differences between the seatbelts of a bench seat car and a bucket seat car?

If anybody has done this swap, can you offer any tips or things to watch out for?

Thanks
 

·
Registered
Joined
·
421 Posts
I also have a question, I have a bench front in a 1970 and I would like top put in a 5 point harness... what do I need top do?

------------------
Francis Taracido
[email protected]
Proud Patron of Quadzilla
 

·
Registered
Joined
·
246 Posts
Bucket seat cars have two belts w/buckles attached at the transmission tunnel, one connects to the reel at the seat base and the other to the shoulder belt attached at the roof line.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top