Team Chevelle banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
I know that a Saginaw 4 speed was the low hp trans, but how many ft/Ibs will one take. The engine is a 454, but it will not ever see slicks only alitte street action. Before the bashing beings, remember that the 3-speed is use by many a stock that have very high horsepower levels And the cost of a good 4-speed is about 100 bones

thanks
 

·
Registered
Joined
·
13,013 Posts
If you want to run a Saginaw 4sp, that's okie doki fine.

If you want to run it behind a 454, that's also okie doki.

Actually, running it behind a 454 until it breaks would be a good test bed.

But when it breaks, just pick up the pieces so that someone doesn't run over them and puncture a tire, and then put in a Muncie or Super T-10.

Let us all know how long it lasts. If nothing else you can be saving your money for the next 4sp while you are running tests on the durability of a Saginaw.


------------------
Tom Parsons
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top