Team Chevelle banner

1 - 9 of 9 Posts

·
Registered
Joined
·
101 Posts
Discussion Starter #1
Hello All. I am considering a four wheel disc brake conversion. I am using 15" Rally wheels on a 1967 Malibu. The front tires are 235 60R 15's. I am thinking about using the 2" drop spindles with the Right Stuff Conversion Kit. If anyone has used this brake kit, please let me know what wheels and tires you are using, as well as any installation issues you encountered. Thank you for your input.

Eric
 

·
Registered
Joined
·
646 Posts
I installed the RSD disc conversion on my 67...no issues. I would recommend tubular upper arms to give you better caster adjustment....
 

·
Registered
Joined
·
101 Posts
Discussion Starter #6
Excellent experience so far. Ordered the kit...two days later, it arrives. I've called Right Stuff twice. Once to place the order, and once for a tracking number. Both times, a person (that's right) answered the phone.
 

·
Registered
Joined
·
759 Posts
Wait, a real person? What kit did you order? I have to do the same for my 67 and emailed Right stuff a number of times. They're very quick to respond.
 

·
Premium Member
Joined
·
1,329 Posts
I installed a Right Stuff 4 wheel brake kit on my 70. Service was excellent! The rear pads were to thick to fit over the rotors. I called them & a slightly thinner set was sent out free of charge. He said sometimes this happens. Kit works great! I have factory size rally wheels.
 
1 - 9 of 9 Posts
Top