Team Chevelle banner

Replacement Procedures.

919 Views 5 Replies 5 Participants Last post by  'clees
For all those more "experienced" body techs.. Would you mind reviewing my plan of action... TIA

1. Adjust Decklid/Door to proper spec
2. Replace Rear Seat Pan
3. Replace Floors
4. Replace Deck Filler Panel
5. Patch RH Quarter
6. Remove LH 1/4
7. Remove outer/inner wells
8. Position both wells to fit
9. Position 1/4 to proper fit.
10. Remove 1/4, weld in Wells.
11. Weld on 1/4

The positioning would use sheet metal screws so I would have a guide to go about when put the 1/4 back on..

1 - 2 of 6 Posts
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.