Team Chevelle banner

Pump To Carb Fuel Line LM-1

1392 Views 7 Replies 4 Participants Last post by  Andy's Auto Repair
I'm having a very hard time finding a one piece pump to carb fuel line THAT FITS for my '69 255 hp 350 LM-1 (350 4 bbl). I got one few years ago that fit good but had to cut it to temporarily install a fuel pressure gauge and can't remember where the line came from. I've tried all the tube bending places I can think of and I have the 4th fuel line that also didn't fit. After working on it with bending and tweaking for 3 hours I finally got it to fit but then the poorly made flare fittings leaked at both ends. I gave up and put the old line back on with its rubber hose section. It has the stock intake, carb, fuel pump, etc.
1 - 2 of 8 Posts
Inline Tube makes a very nice piece in steel as well as stainless,
Andy you have a PM. Don't want to vendor bash.
Von, got it, I meant to say Right Stuff. They hooked it up on my 65 442. Even made me a fuel line that was not listed as every Olds V8 was 5/16, not 3/8.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top