Team Chevelle banner

Problem wiring MSD box to battery

669 Views 5 Replies 3 Participants Last post by  rednecks70
Well, a picture is worth a 1,000 words. The connector isn't long enough to clear, any ideas on an option?


See less See more
1 - 1 of 6 Posts
Is there a way to get the MSD wire to the starter post without melting it?
You could also use a threaded stud in place of the terminal bolt and use two nuts. One nut to hold the cable and the other on top of the first to hold the MSD wire.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.