Team Chevelle banner

Printed Circuit Fix

703 Views 1 Reply 2 Participants Last post by  bikeron
In the past,I referenced a product I used called Nickel Print,that I used on a broken printed circuit board.This is for short small cracks or fractures in the circuit itself,and not really recommended for large wide open gaps.It's highly conductive & fast drying too.
Here's a link to it,and I highly recommend it,if you can't find a replacement for your printed circuit board.
It works very well,and has stood the test of time for me so far.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.