Team Chevelle banner

Power steering hoses&fittings

914 Views 4 Replies 3 Participants Last post by  von
Hello,I'am putting a stock G.M. power steering setup in my 1969 Chevelle Malibu with a 350 motor.My question is on fittings on the pump & steering box. Is there a fitting that goes on to the back of the pump that the high pressure line hooks to?And is there special fittings that go on to the steering box,What years will work on the fittings on the box and where would a person find these fittings?Local parts stores where I'am from don't carry these items. Thanx Jerry
1 - 2 of 5 Posts
O.K. I purchased the hoses at the parts store,On the back of my power steering pump there is a spot for the fitting,it will need a fitting to accept the female end of the high pressure hose We looked in the book & it needs to be from a 1968 to 1974 G.M. OR 1968 TO 1974 BIG BLOCK FORD. This is a saginaw pump.On the high pressure hose there is a male end that goes to the steering box & a female end that goes to the back side of the pump.Where would be the best place to find THIS FITTING other than a junk yard?Thanx for all the help Jerry:confused:
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.