Team Chevelle banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I saw on another post that someone stated that the power brake booster vacuum hose should be connected to the rear port of a Holley carb. I have a Holley 650 dp and have my PVC hose connected to this port at the rear of the carb. My power brake vacuum hose is connected directly to an intake manifold port. Which is correct?
Thanks in advance!
 

·
Registered
Joined
·
12,958 Posts
Some cars have the hose connected to the carb, some to the intake. If it is connected to the intake, it is less hassle if and when you remove the carb. But the main thing is that it is connected to a strong vacuum source.

------------------
 
L

·
Guest
Joined
·
0 Posts
You have it correct already. Rear carb port is PCV, brake booster generally plumbed to intake.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top