Team Chevelle banner

Poly-lock loose?

1K views 4 replies 4 participants last post by  64play 
#1 ·
While fixing a valve cover leak(stay away from those cheap fab ebay covers), I noticed one of the rocker arms was slightly loose, so i tightened it back up, Also before and after i adjusted the rocker arm I noticed that the poly lock is protruding about 2-3 threads higher than the others, should I be worried? Engine is a freshly built 498 billet roller with less than 100 miles, thanks
 
#2 ·
I would be
You need to find out why one is different
It could be as simple as one stud is long which is not an issue or the trunion is upside down which is an easy fix
Anything else either the geometry is wrong on that one or the other 8
 
#3 ·
Anything else either the geometry is wrong on that one or the other 8
Hi Mike. Just a quick jab ;). What is the 8th rocker in the other 8?

Gee I hope I didn't spell something wrong or I'll be on the other end of this one :D.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top