Team Chevelle banner

plugging holes on 72 dash

705 Views 1 Reply 2 Participants Last post by  Ricky-G
I have two 1/8" holes above my radio on my 72 dash. What's the best way to plugg those things and make them blend in?

1 - 1 of 2 Posts
I filled a couple holes in mine with 5 minute epoxy.Its a 2 part epoxy that comes in a sringe.Fill a little at a time until you get it flush,then I used a scotch brite pad to give it some grain.Wait till its tacky though before you try to put the grain back .

Ricky-G 68 L78 Chevelle SS, 69 Z-28,95 Firebird,72 Chevy pickup,
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.