Team Chevelle banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
2,294 Posts
It will be 18436572 and go clockwise. You need to bring # 1 up to TDC and see where the rotor is pointing to on cap and start that with # 1. Pull coil wire and bump motor over with # 1 plug out. You will fill compressed air when it comes up on TDC, Look at the balancer it should be close to 0 degrees. On the motor the drivers side bank is 1357 and pass 2468. Hope this helps you.
 
1 - 1 of 1 Posts
Top