[kens56chevy]

Does anyone have any extra plastic flanged bushings for the 68-72
auto. staple shifter. There are two of them on the rod that the handle attaches to the base. Can't find anyone that makes a repro.

 

[RealRed70]

Lawn and garden eqiuppent repair shops use pretty much the same pieces on lawn equipment. Push movers may have them used in different areas. That is where I got some that were desroyed. I tried Menards and Home Depot they did not have any. Could try a local hardware store. They are just plastic bushings. Good luck.

 

[RealRed70]

Snow blowers also use them where steel shafts slide through the housing.

 

[sbvelleman]

If you can't find them locally, McMaster-Carr has them in a wide variety of different sizes and materials. Here's the link: http://www.mcmaster.com/#sleeve-bearings/=bkujt8. There listed under flanged sleeve bearings.