Team Chevelle banner

oil to rockers

586 Views 1 Reply 2 Participants Last post by  swcash
Anyone tell me about how long it takes to get the oil to the rockers on a cold start. I use 20W 50 Valvoline, K & M filter. and have Crane rollers. The oil pressure guage will go to 80 lbs within 5 seconds.
Today I started the motor to adjust the valves and thought it took to long to get the oil up there. Its been sitting for about 5 weeks. Motor has been running fine the last 6k miles since it has been rebuilt. Its a 396. I know with the stock rockers it pumped up pretty fast but I believe the stock rockers have a larger oil hole than the Carnes.
Anything to worry about????
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.