Team Chevelle banner

non chevelle defrost question/ glass ?

575 Views 4 Replies 4 Participants Last post by  Motorvation
I have a 98 civic I am fixing up for my mom and the connector that is solder to the back glass on one side has come loose from it's joint. I was wondering if anyone might knw a fix besides new glass? Thanks Brandon
1 - 1 of 5 Posts
Silver bearing epoxy, pricey and effective. Loctite has a kit for re-glueing rear view mirror button back on and copper paint to reconnect. Solder back on with 700W iron. Heat up solder on glass and stick tab against it, then put iron on tab and heat both to attach. Just did it today with small, stick type iron....couple attempts and its OK! Don't over heat or BOOM, new glass.......

Steve O.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.