Team Chevelle banner
  • Hey everyone! Enter your ride HERE to be a part May's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
1,055 Posts
Discussion Starter · #1 ·
hi guys,
i replaced my dash bezel on my 69 with 1 that i restored. now my turn signals don't work at all and neither do my windshiels wipers. i thought i was being careful and put everything back the way it was. could i have missed a ground somewhere? the headlights work fine. thanx mike
 

·
Premium Member
Joined
·
1,394 Posts
May sound simple, but check your fuses. If not, check your ground wires.
 

·
Premium Member
Joined
·
2,223 Posts
The problem is likely the cluster ground. This is the cluster ground for a 69. The red arrow points to where it contacts the metal dash frame. The metal piece is sandwiched between the dash plastic and the dash frame. It is attached to the wiper switch and the headlight switch. The black wire grounds the cluster back.

The headlight switch works fine without a ground however it will not turn on the interior/courtesy lights.
 
1 - 4 of 4 Posts
Top