Team Chevelle banner

Need help with linkage installation!

1217 Views 9 Replies 4 Participants Last post by  Mr69
Please need some help! I have a 70 Chevelle SS with a 400 transmission. As you can see in the pictures this is where I'm at. I can't figure out how the shifter linkage attaches to the transmission. The assembly manual shows a rod that attaches to the steering column and then is connected to shift bracket and there is a illustration without the rod. Is there a square insert that goes in the bottom opening that will allow the linkage to connect to the bracket? I do have the bracket that bolts to the bottom of the pan but that is all I have left for parts. As you can see I'm all confused.

See less See more
1 - 3 of 10 Posts
Dan, thats exactly what I needed and the diagram is much clearer than mine. What is the purpose of the rods going to the column and do I really need them?

Thanks guys! I guess I'll have to run down the parts I need. I looked yesterday and could not find those rod assemblies. Thats why I asked if I really even needed them.
1 - 3 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.