Team Chevelle banner
  • Hey everyone! Enter your ride HERE to be a part May's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
329 Posts
Discussion Starter · #1 ·
I have tryed to hook up the starter ,my harness is a mess, what wires go to the starter.there are three post i know were the bat.+ i was told to hook the purple to the s post its hard to tell if there is a s on the post so is this the one close to block or to the header? now what go's on the othere post .I have HEI now so now i have to rig a power cable to the HEI.now how dose power get to the harness then to the ignition? i need to see a wiring map , HELP :confused:
 

·
Registered
Joined
·
7,762 Posts
The "S" terminal is the one next to the block. If the ignition switch is good, you don't need any wires tied to the outer "R" terminal, because you have HEI.
 
1 - 2 of 2 Posts
Top