Team Chevelle banner

Need a measurement

949 Views 10 Replies 5 Participants Last post by  Kim57
I posted this in the bodyshop section and got no responses. Maybe here I will do better.
I would realy appreciate if someone with a BB in a 67 could give me a couple of measurments.
#1 From the hole where the front shock comes through the frame to the
back of the engine.
#2 From the same hole to the firewall.
I would be very grateful for this.
1 - 3 of 11 Posts
Just saw your post. To clarify you want from the shock bolt to where the bellhousing meets and then to the firewall correct? I just pulled my motor but will get the firewall measurement tonight for you. There is approximately 3 inches between the engine and the firewall if that is what you are trying to figure out.
Sorry Kim, will get it for you tonight I promise.
Ditto on the measurements straight back to the firewall. Sorry for the delay in responding earlier
1 - 3 of 11 Posts