Team Chevelle banner

Mallory Unilite Dist model 47 adva setting Help!

1611 Views 2 Replies 2 Participants Last post by  66dream
I want to adjust my total mechanical advance on my Mallory unilite model 47 distributor but can not figure out how to dissasemble the advance plate to gain access to the advance stops.
Please help!
1 - 1 of 3 Posts
Remove cap, rotor, and vacuum advance chamber. Loosen two set screws in side of bowl with allen wrench. Lift out module plate.
1 - 1 of 3 Posts
Top