[66dream]

I want to adjust my total mechanical advance on my Mallory unilite model 47 distributor but can not figure out how to dissasemble the advance plate to gain access to the advance stops.
Please help!

 

[RobbMc]

Remove cap, rotor, and vacuum advance chamber. Loosen two set screws in side of bowl with allen wrench. Lift out module plate.

 

[66dream]

Re: Mallory Unilite Dist model 47 adva setting Help! Never mind

Never mind!
I finally figured it out, There are 2 set screws on the side of the dist housing that hold the adnce plate down.
thanks anways