Team Chevelle banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
263 Posts
The switch is relatively easy to remove. You need to remove the dash panel below the steering wheel and then remove the two bolts that hold the steering column to the dash and drop the column. Next look on the top side of the column for the switch (get a new switch and look at it to see what it looks like)Unplug the wiring harness then remove the 2 screws (5/16 or 1/4) that hold it to the column. Pay attention how it came off and install new switch and hook up wiring harness.
Good Luck I hope this helps.

------------------
The more cubes the better!!!
70 SS 396
71 SS 454 clone 8.8 1/8 on pump gas and 8" slicks
Team Chevelle # 1143
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top