[blue1970ss]

hi all, I am trying to remove my ignition switch from a 1969 chevelle. I have already removed the steering whell and the signal light assembly. but i cant seem to be able to remove my ignition switch, should it be a small hole to release it??? if so i cant see it. also, do i need the key?? i dont have it.. tnx advance..

 

[Rick Bandy]

I'm not positive but I believe there will be a slot under where the turn signal unit was that you can stick a very thin blade in to release the switch.

 

[blue1970ss]

tnx for the reply,,, i finally got it,, found some good instructions here http://www.carcraft.com/howto/56459/ ..... just had to cut through it to get to the latch..

 

[Randy Mosier]

I had just posted a how-to in another thread. I'll see if I can find, because I also posted a picture.

 

[Randy Mosier]

Right here:

http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi?ubb=get_topic;f=31;t=002476