500-525HP. Talk to Mike about milling options to get some compression. Then 550+ HP.
HP Guesstimations? AIR DYNO TIME!
Wondering what you fella's thought this would put out.
Got a 468 bbc
Flat top Pistons
About 8.7:1 Compression
Gonna buy some Brodix RR O's CNC option from wolfpack
Beehive springs etc...
1.7 Stainless Full Roller Rockers
Lunati Hydraulic Roller Cam 282/290 Dur .600/.600 Lift 110LSA
Unsure whether to go with an edelbrock Victor JR single plane, or the RPM air gap dual plane
800cfm Thunder Series Carb
Large Tube headers going through an open exhaust thanks to some warlock mufflers
Got a 468 bbc
Flat top Pistons
About 8.7:1 Compression
Gonna buy some Brodix RR O's CNC option from wolfpack
Beehive springs etc...
1.7 Stainless Full Roller Rockers
Lunati Hydraulic Roller Cam 282/290 Dur .600/.600 Lift 110LSA
Unsure whether to go with an edelbrock Victor JR single plane, or the RPM air gap dual plane
800cfm Thunder Series Carb
Large Tube headers going through an open exhaust thanks to some warlock mufflers
1 - 1 of 2 Posts
1 - 1 of 2 Posts
