Team Chevelle banner

HP gains with bigger lift cam??????

1492 Views 5 Replies 4 Participants Last post by  BillyGman
I'm looking for the short general answer here....

I've got a 14 : 1 compression 470 inch solid roller BBC...My current cam has a net lift of .650 with a 280 dur @ .050 110LSA. Timing locked out at 38 Deg. 1050 dommie

I am in Colorado, so air is thin.

For a quick answer.......would I gain more or less than 30 HP at 7500RPM with a .700 lift cam?


1 - 1 of 6 Posts
Need head specs, rocker ratio. In high altitude over lifting does help but without more info can't tell you...
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.